Clutch Mounting Studs - 43mm
43mm Clutch Cover Retaining Stud designed for single plate racing style clutches using Ø8mm diameter fixings.
They are designed to be pressed in from the engine side of the flywheel and the cover locates on 2 ground registers along the stud giving accurate location and easy removal of the clutch from one side without having to mess about trying to hole a nut behind the flywheel.
They are made from high-grade steel ensuring long life and no torque relaxation.
A suitable alternative to the AP Racing Studs for clutches of Ø115mm (4.5") and above.
Our stud design incorporates offset head flats for location, necked down shanks and precision ground location diameters.
Available in sets of 6 and K-nuts can be supplied if required.
-
-
Material: High-Grade Steel
Position: Concentric
Dimensions: Ø 8mm x (L) 43mm
Thread: Part-Threaded
Recommended tightening torque: M8 & 5/16" - 22.0 Nm (16 lb/ft).
Advertisement
We recommend using our Clutch Bolts which come with K-Nuts at a competitive price, in some instances SAVING 25% over our competitors.
SAVE up to 25% over competitors
More sizes are available
or can be produced please call
📞0845 557 7408
Sizes Available Ø M8 x (L)
38.5 | 40mm | 43mm | 48mm | 52mm | 55mm | 60mm | 64 mm | 68mm |
BMW M12 44mm Eccentric Clutch Stud
Cosworth DFV
More sizes are available
or can be produced, please enquire.
If you can’t find what you’re looking for, contact us.
Ark Racing can create a solution to meet your requirements.
Call us on +44 (0)845 557 7408 or complete our online contact form.
