Flywheels
Quick Search..
“Can’t locate what you’re looking for.
Please contact us, it may be in the process of being added to the website. ”
— Ark Racing Limited
NEW and FEATURED FLYWHEELS
Honda K20 Fast Road Flywheel. This lightweight Honda flywheel with a mass lightning pocket hole design has been designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitride heat treatment with a Shot Peened surface treatment.
Ark Racing’s lightweight Porsche 944 Ring Gear is precision-engineered in-house to professional motorsport standards. Manufactured to exacting standards using high-grade steel,
Rover K-Series Lightweight Flywheel. This lightweight K-series flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Our Ford Duratec STD Lightweight Flywheel with a mass of only 3.68 Kg was designed, developed and manufactured in-house by Ark Racing Limited.
ABARTH
Designed as a direct replacement for the original unit, this Abarth lightweight flywheel is engineered in-house by Ark Racing Limited to meet professional motorsport standards.
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
ALFA ROMEO
Engineered in-house by Ark Racing Limited, this Alfa Romeo P3 ring gear is built to exacting motorsport standards for strength, durability, and weight optimisation.
Precision-engineered by Ark Racing Limited, this early Alfa Romeo F3 flywheel is designed, developed, and manufactured entirely in-house to meet professional motorsport standards.
See Ark Racings’ range of Starter Motors available for the Alfa Romeo.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
ALVIS
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
ASTON MARTIN
Upgrade your Aston Martin Vantage with Ark Racing Limited’s in-house engineered lightweight flywheel.
See Ark Racings’ range of Starter Motors available for the Aston Martin.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
AUDI
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
AUSTIN
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
BENTLEY
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
BMW
Ark Racing Limited introduces a lightweight flywheel engineered for BMW 130i performance enthusiasts and track-day drivers.
The BMW 130i LW Version C flywheel (6.75Kg) is a bespoke performance component designed, developed, and manufactured in-house by Ark Racing Limited.
Ark Racing Limited presents a precision-engineered conversion flywheel designed to adapt the BMW E36 M3 DMP setup to an M5 manual clutch system.
Ark Racing® Limited presents a bespoke BMW M12 Standard Flywheel engineered specifically for professional motorsport teams.
See Ark Racings’ range of Starter Motors available for the BMW.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
BUGATTI
This Flywheel is supplied as a kit with starter unit for the Type 57 Bugatti. Please see kits page.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
CATERHAM
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
CHEVROLET
Chevy LS1 7.25” Clutch Flywheel weighing only 3.34 Kg. Designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Chevy LS9 104T 7.25” Clutch Flywheel weighing only 3.31 Kg. Designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Chevy 105T 7.25” Clutch Flywheel weighing only 2.64 Kg. Designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Chevy 104T Flywheel weighing only 3.15 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Chevy 96T Flywheel weighing only 2.75 Kg. Designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Chevy 94T Flywheel weighing only 2.58 Kg. Designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Chevy LS1 8.5” Clutch Flywheel weighing only 3.44 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
See Ark Racings’ range of Starter Motors for the Chevy.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
CLASSIC MINI
This lightweight Classic Mini Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.,
See Ark Racings’ range of products for the Classic Mini including Alternator and Fixing Kit, Lightweight Flywheel and Starter Motor.
Also suitable for:
Mini Moke / Austin 850 / Austin Cooper / Austin Mini / Innocenti Mini (1965–75) / Leyland Mini / Morris 850 / Morris Mini / Riley Elf / Wolseley 1000 / Wolseley Hornet. (BMC engine compatible). Our Ark Racing Alternator and Starter are also available to order!
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
COSWORTH
Cosworth YBB Flywheel. This lightweight Cosworth YBB flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth MAE F3 1000cc Flywheel. This lightweight MAE F3 1000 flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth YBM Lightweight 5.5” Clutch Flywheel. This lightweight Cosworth YBM flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth YBM 7.25 Clutch Standard Flywheel. This lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
DFV 5.5 Stepped Ultra Thin Flywheel. This lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Deep Dish Stepped Flywheel 5.5” Clutch. This lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth MAE Lip Seal 90T 5.5” Clutch Billet Flywheel, this lightweight Cosworth MAE flywheel, was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth MAE Lip Seal 90T Lightweight Flywheel, this lightweight Cosworth MAE flywheel, was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth MAE Lip Seal 90T Flywheel, this lightweight Cosworth MAE flywheel, was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth FVA Flywheel, a lightweight Cosworth FVA flywheel, was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFR 7.25” 8-Bolt Flywheel, this lightweight Cosworth DFR flywheel, was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Stepped Carbon Clutch 8 Bolt Flywheel, this lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Flat Back Carbon Clutch 8 Bolt Flywheel. This lightweight Cosworth DFV flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV 7.25 Clutch LW Flywheel, this lightweight Cosworth DFV flywheel is designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Standard 7.25” Flywheel, This standard Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFY F3000 Flywheel, This lightweight Cosworth DFY F3000 flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Ford YBM 104T (104 teeth) Flywheel. Designed, developed and manufactured in-house by Ark Racing Limited
A small Rope Seal Flywheel, designed and manufactured for the Cosworth SCA 90T Engine.
Cosworth SCA 90T Lip Seal Flywheel, designed and manufactured for the Cosworth SCA Engine.
See Ark Racings’ range of Starter Motors available for Cosworth engines.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
COVENTRY CLIMAX
Coventry Climax 89T Flywheel. Designed, developed and manufactured in-house by Ark Racing Limited. Drawn up to suit the original 89T singer Ring Gear.
See Ark Racings’ range of Starter Motors for the Coventry Climax.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
DATSUN
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
DELAHAYE
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
DFV
DFV 5.5 Stepped Ultra Thin Flywheel. This lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Deep Dish Stepped Flywheel 5.5” Clutch. This lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Stepped Carbon Clutch 8 Bolt Flywheel, this lightweight Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Flat Back Carbon Clutch 8 Bolt Flywheel. This lightweight Cosworth DFV flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV 7.25 Clutch LW Flywheel, this lightweight Cosworth DFV flywheel is designed, developed and manufactured in-house by Ark Racing Limited.
Cosworth DFV Standard 7.25” Flywheel, This standard Cosworth DFV flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
DURATEC
Our Ford Duratec STD Lightweight Flywheel with a mass of only 3.68 Kg was designed, developed and manufactured in-house by Ark Racing Limited.
If you are looking for low crank centreline and lightweight this is the product for you.
A bespoke Duratec flywheel has been designed specifically to suit an F3 type installation.
See Ark Racings’ Starter Motors for the Duratec engine.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
FERRARI
Our Ferrari 750 Monza flywheel with a respectable mass of 6.22Kg was designed by Ark Racing as a replacement for the original flywheel.
Our Ferrari 430 Ring Gear is designed as a replacement for the original. Mass only 0.417Kg. Developed and manufactured in-house by Ark Racing Limited.
Our Ferrari 250 STD flywheel with a respectable mass of 6.22Kg was designed by Ark Racing as a replacement for the original flywheel.
Our Ferrari F40 Lightweight Flywheel with a respectable mass of 3.67Kg designed by Ark Racing as a replacement for the original flywheel.
See Ark Racings’ range of Starter Motors for the Ferrari.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
FIAT
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
FORD
Our Ford Duratec STD Lightweight Flywheel with a mass of only 3.68 Kg was designed, developed and manufactured in-house by Ark Racing Limited.
Ford YBM 104T (104 teeth) Flywheel. Designed, developed and manufactured in-house by Ark Racing Limited
Ford 289 v8 FIA Lightweight Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
If you are looking for low crank centreline and lightweight this is the product for you.
Ford 289 V8 FIA Flywheel. Designed, developed and manufactured in-house by Ark Racing Limited.
A bespoke Duratec flywheel has been designed specifically to suit an F3 type installation.
See Ark Racings’ range of Starter Motors for the Ford.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
FORMULA 3
Cosworth MAE F3 1000cc Flywheel. This lightweight MAE F3 1000 flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Formula 3 Ring Gear. This ring gear was designed, developed and manufactured in-house by Ark Racing Limited.
Toyota Pre 1983 Formula 3 Flywheel weighing only 2.77 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
If you are looking for low crank centreline and lightweight this is the product for you.
A bespoke Duratec flywheel has been designed specifically to suit an F3 type installation.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
GOUGH
Gough Lightweight Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
See Ark Racings’ range of Starter Motors for the Gough.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
HART
Hart 420R Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Hart BDA Flywheel, designed, developed and manufactured in-house by Ark Racing Limited., it is made to the highest standards using high-grade steel
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
HEWLAND
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
HONDA
Honda K20 Fast Road Flywheel. This lightweight Honda flywheel with a mass lightning pocket hole design has been designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitride heat treatment with a Shot Peened surface treatment.
Honda S2000 Lightweight Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
Ark Racings, lightweight Honda Type-R flywheel for the 5.5-inch clutch. With a respectful mass of 2.12 Kg.
Honda Type R Race Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
See Ark Racings’ range of Starter Motors for the Honda. Ark Racing® also manufacture a high-quality Honda K20 Starter + Flywheel Kit.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
JAGUAR
Jaguar V6 Fine Toothed Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitride heat treatment with a Shot Peened surface treatment.
Jaguar D-type LW Ring Gear, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Jaguar V12 Special Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
See Ark Racings’ range of Starter Motors for the Jaguar.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
LANCIA
Lancia Fulvia Lightweight Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
Lancia Fulvia Standard Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
See Ark Racings’ range of Starter Motors for the Lancia.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
LOTUS
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
MASERATI
Maserati Tipo 60/61 Birdcage Flywheel weighing only 3.84 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Maserati 250F Flywheel weighing only 2.82 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Maserati 3500GT LW Flywheel weighing only 8.89 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Maserati 3500GT 9.5” Flywheel weighing only 13.28 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Maserati 3500GT Standard Flywheel weighing only 11.96 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
Ark Racing's Maserati 200S flywheel is one of the lightest steel options available
See Ark Racings’ range of Starter Motors for the Maserati.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
MEADOWS
Meadows Mexico Flywheel, designed, developed and manufactured in-house by Ark Racing Limited. It is made to the highest standards using high-grade steel, Nitrided heat treatment with a Shot Peened surface treatment.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
METRO
Metro 6R4 Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
MG
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
MINI
This lightweight Classic Mini Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.,
Also called/ suitable for: Mini Moke / Austin 850 / Austin Cooper / Austin Mini / Innocenti Mini (1965–75) / Leyland Mini / Morris 850 / Morris Mini / Riley Elf / Wolseley 1000 / Wolseley Hornet (BMC engine compatible). Our Ark Racing® Alternator is also available!
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
MODULAR
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
NISSAN
Nissan Skyline GTiR 8-bolt 7.25” Flywheel. This lightweight Skyline flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Nissan Skyline GTiR 6-bolt Flywheel. This lightweight Skyline flywheel was designed, developed and manufactured in-house by Ark Racing Limited.
Ark Racing Limited presents the ultra-lightweight Nissan NPT-90 flywheel, weighing just 0.33 kg.
Upgrade your Nissan 350z with Ark Racing’s precision-engineered one-piece flywheel, weighing just 8.24 kg.
See Arks Racings’ range of Starter Motors available for the Nissan.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
PORSCHE
Ark Racing’s lightweight Porsche 944 Ring Gear is precision-engineered in-house to professional motorsport standards. Manufactured to exacting standards using high-grade steel,
Ark Racing’s lightweight flywheel for the Porsche 962 weighs just 4.46 kg, delivering exceptional performance for motorsport applications.
Ark Racing’s lightweight flywheel for the Porsche 911 2.0L weighs just 5.54 kg, delivering high-performance efficiency for motorsport builds.
Ark Racing’s lightweight flywheel for Porsche 993 GT2 (911) weighs just 5.02 kg, delivering high-performance efficiency for competitive motorsport builds.
See Ark Racings’ range of Starter Motors available for the Porsche.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
RILEY & SCOTT
The flywheel is not displayed on the website! Contact us should you require one created. Ark Racing can manufacture one for you.
RENAULT
Ark Racing’s 3.26kg lightweight flywheel for Renault 5 Turbo is engineered for elite motorsport use.
Ark Racing’s Renault 5 Turbo standard mass flywheel is built to professional motorsport standards. Made in-house from high-grade steel with Nitrided heat treatment and shot-peened finish, it delivers strength, durability, and optimal mass for high-performance race applications.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
REYNARD
Our Reynard 101T 10-Bolt Ring Gear is designed as a replacement for the original. Developed and manufactured in-house by Ark Racing Limited. Proven in F3000 race events.
Our Reynard 101T 8-Bolt Ring Gear is designed as a replacement for the original. Developed and manufactured in-house by Ark Racing Limited. Used to great effect in F3000
See Ark Racings’ range of Starter Motors for the Reynard.
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
STAR MOTOR COMPANY
Designed specifically for classic Star Motor Company vehicles produced between 1898 and 1932, this standard-weight flywheel
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
SUBARU
Subaru Impreza 6 Speed Lightweight Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.,
See Ark Racings’ range of Starter Motors for the Subaru.
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
TOYOTA
Toyota Pre 1983 Formula 3 Flywheel weighing only 2.77 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
See Ark Racings’ range of Starter Motors for the Toyota.
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
VAUXHALL
Flywheel for Vauxhall 2.0XE weighing only 3.67 Kg. Designed, developed and manufactured in-house by Ark Racing Limited.
For more information about this or our other products and services contact us for more details: +44 (0)345 557 7408
WOLSELEY
This lightweight Classic Mini Flywheel, designed, developed and manufactured in-house by Ark Racing Limited.,
Also called/ suitable for: Mini Moke / Austin 850 / Austin Cooper / Austin Mini / Innocenti Mini (1965–75) / Leyland Mini / Morris 850 / Morris Mini / Riley Elf / Wolseley Hornet (BMC engine compatible). Our Ark Racing® Alternator is also available!
For more information about these or our other products and services contact us for more details: +44 (0)345 557 7408
QUICK SEARCH…
Whatever your requirements are, whether high output, high torque, weight reduction or something more specific, Ark Racing® Limited can provide a solution. So get in touch today on 0345 557 7408 for a quotation or to place an order. Or use our online contact form with your enquiries.
